zu:[1][Changes take effect after|the next start of the program.][OK]
bl: (Folder)
bm:Automation
bn:all Channels
bo:Post Process View
bp:Input View
bq:Input Process
br:Octavizer
bs:Velocity Add
bt:Pre Process View
bu:Input Notes
bv: All Objects
bw: Global Objects
bx: Click & Ports
by: MIDI Instr.
bz: GM Mixer
c0: Audio
c1: Instruments
c2:Modem Port
c3:Printer Port
c4:MIDI Click
c5:to Recording & Thru
c6:Physical Input
c7:GM Device Modem
c8:GM Device Printer
c9:GM Device
ca:Layer 1+2
cb:Drums Mapped
cc:Color
cd:MTP Cable Mode
ce:When Opening a song, ask to 'Close current Song(s)?'
cf:Sort Instrument menu by Layers
cg:Sort Instrument menu by Icons
ch:MIDI Machine Control uses old Fostex Format instead of MMC
ci:Auto Backup offAuto Backup last song versionAuto Backup last 3 song versionsAuto Backup last 5 song versionsAuto Backup last 10 song versionsAuto Backup last 30 song versionsAuto Backup last 50 song versionsAuto Backup last 100 song versions
cj:Display SMPTE with BitsDisplay SMPTE without BitsDisplay SMPTE with Quarter FramesSMPTE as Feet & Frames, 35mm filmSMPTE as Feet & Frames, 16mm filmDisplay SMPTE with milliseconds
ck:Tempo as Beats Per Minute (BPM, Maelzel)Tempo as BPM without DecimalsTempo as Frames Per Click with EighthsTempo as Frames Per Click with Decimals
cl:Clock Format 1 1 1 1Clock Format 1. 1. 1. 1Clock Format 1 1 1 0Clock Format 1. 1. 1. 0Clock Format 1 1 1Clock Format 1. 1. 1Clock Format 1 1 0Clock Format 1. 1. 0
cm:Reset Controls on stop
cn:Always Close current songs when opening
co:Always stop when opening song
cp:Use Apple MIDI Manager if available
cq:Use AUTOLINK with SoundDiver or SoundSurfer if available
cr:Allow Song Position Pointer while playing
cs:Send all Reset Messages to all OMS Objects
ct:Send globally to Port ZeroSend individually to each Port
cu:Send Used Instrument Settings On Reset
cv:OMS currently not in use.
cw:Connect all Real OMS Input Instruments with Logic
cx:Create virtual IAC OMS Instrument for Logic
cy:Input Connections:
cz:
zv:[1][AMT enabled!|Please make sure that the connected MIDI interfaces are AMT compatible.][OK]
zw:[1][Enable 'Fast Mode' (e.g.|press 'Panic' at UNITOR)|Disable 'Check For MTP' if|using an Emulation interface.][OK]
d0:Disk Protection:
d1:(OMS currently in use)
d2:Allow Tempo Change Recording
d3:Click only during Count-in (Record)
d4:Polyphonic Clicks
d5:MIDI Data Reduction
d6:Sysex with MIDI Thru function
d7:Transmit MTC (MIDI Time Code)
d8:Auto Sync In (see Transport Window Sync Menu)
d9:MMC (MIDI Machine Control )
da:MIDI Remote (see key commands)
db:Send All Fader Values after loading
dc:Chase all other Controls
dd:Chase Control 0-15
de:Chase Control 64-71
df:Chase sustained Notes
dg:Chase Notes in 'No Seq Trp' instruments
dh:Chase sep. channels in 'All Cha' instruments
di:Chase on Cycle Jump
dj:Chase Notes on Cycle Jump
dk:Send full MIDI Reset before Chasing
dl:Wait for noteNo count-in1 Bar count-in2 Bar count-in3 Bar count-in 4 Bar count-in 5 Bar count-in 6 Bar count-in2/4 count-in3/4 count-in4/4 count-in5/4 count-in 6/4 count-in7/4 count-in8/4 count-in9/4 count-in10/4 count-in
s3: Thru Fix Add Sub Min Max Flip Mul Div Scale Range Random +- Rand. Reverse Quantize Qua&Min Exponent. Crescend. rel.Cres. Use Map (unused) (unused) Diatonic
y5:[1][Do you want to use this|map as value 2 operation?][Cancel|Use Map]
s4:Init
s5:Reverse
s6:Invert
s7:Smooth
s8:Filter Duplicate Events
s9:Quick Edit Marker
sa:Edit Marker
sb: AMT Version 1 (any UNITOR version) AMT Version 2 (Unitor version 1.2.9 or later) AMT Version 3 (Unitor version 1.3.0 or later)
sc:Tile Windows &horizontally
sd:Audio Mixer
se:Version 4.0 LookVersion 3.x Look
sf:Put into
sg:CIRCULAR!
sh:Make Alias
si:Double Click to import this Groove permanently!
sj:Copy Screenset
sk:Paste Screenset
y6:[1][Channel protected! Select another Sub Channel or the multi itself to change the common driver destination.][OK]
sl: Merge
sm: Replace
sn: Update
so:Soft Fade Time...
vn:The audio setup has changed. Please select a new audio driver from the audio driver preferences.
sp: Audio
y7:[1][Do you want to copy the current screenset to screenset %?][Cancel|Recall %|Copy to %]
sq:Add Bus Return(s)
sr:Create GM Drum Set
ss: Conditions
st: Operations
y8:[1][^P does run on Windows 95. However, this is not recommended because under certain conditions the MIDI timing can be affected. Windows 98 solves this problem. Please consider to use Windows 98 if you experience MIDI timing problems.][OK]
su: Use SMPTE View Offset
sv: SMPTE View Offset...
sw: Giant SMPTE Display
sx: Giant Bar Display
sy: Control Switches Display
sz: Mode Switches Display
t0: Position Display
t1: Locator Display
t2: Tempo/Signature Display
t3: MIDI Activity Display
t4: All Elements Horizontal
t5: All Elements Normal
t6: Device Name
t7: Short Device Name
t8: Name of Text 'Fader'
t9: Program Names
ta: Value Names of Text 'Fader'
tb:Use GM Drum Program Names for Channel 10
tc: (No Bank specified. Names of Bank 0 used)
y9:[1][Initialize New Bank?][Cancel|Initialize]
td: Initialize
te:Names as Note
tf:Names as General MIDI
tg:Output Notes
th:Output Velocities
ti:Output Channels
tj:Output Cables
tk:Score Parameters
tl: Lock Screenset
ya:[1][Are you sure about adding a Multi Instrument to a Macro? The channels are not available within the Macro.][Abort|Create]
yb:[1][Do you want to protect the Macro?|A protected Macro cannot be unpacked. Don't forget to make a copy of the source objects!][Don't protect|Protect]
yc:[1][Do you want to close the song?][No|Close Song]
tm: Open Keyboard Window
tn: Note 'C'
to: Note 'C#'
tp: Note 'D'
tq: Note 'D#'
tr: Note 'E'
ts: Note 'F'
tt: Note 'F#'
tu: Note 'G'
tv: Note 'G#'
tw: Note 'A'
tx: Note 'A#'
ty: Note 'B'
tz: Rest
u0: Next note will be sharp
u1: Next note will be flat
u2: Chord Mode
u3: Erase
u4: Step backwards
u5: Step forward
u6: Octave 0
u7: Octave 1
u8: Octave 2
u9: Octave 3
ua: Octave 4
ub: Octave 5
uc: Octave 6
ud: 1/1 note
ue: 1/2 note
uf: 1/4 note
ug: 1/8 note
uh: 1/16 note
ui: 1/32 note
uj: 1/64 note
uk: Next three notes are triplets
ul: Next two notes are a dotted group
um: Velocity 16 (ppp)
un: Velocity 32 (pp)
uo: Velocity 48 (p)
up: Velocity 64 (mp)
uq: Velocity 80 (mf)
ur: Velocity 96 (f)
us: Velocity 112 (ff)
ut: Velocity 127 (fff)
uu: Keyboard Input
yd:[1][Roland VS is tempo master. Please change the tempo there.][OK]
uv: Score Song Settings
uw:Octave - 2
ux:Octave - 1
uy:Octave + 1
uz:Octave + 2
w0: 1/128 note
w1:Conn. 1
w2:Conn. 2
ye:[2][Caution!|Top Window is NOT|the current recording folder!][Abort|Record]
w3: Show Selected Sequences Only
w4: &Drum
w5:Double Click Sequence to open Score Edit in ArrangeDouble Click Sequence to open Event Edit in ArrangeDouble Click Sequence to open Matrix Edit in ArrangeDouble Click Sequence to open Drum Edit in Arrange
w6:Drum Editing
yf:[1][Do you want to change the quantization of a complete folder?][Cancel|Quantize]
yh:[1][There are some events before position '1 1 1 1'. Move all selected tracks or put all upbeat events to position '1 1 1 1'] [Move all|Upbeat|Cancel]
yi:[3][There are Objects in this track!|Delete Track and Objects?][Cancel|OK]
yj:[1][This is an Alias without data.|Do you want|to make and edit a real copy or|to edit the original?][Cancel|Real Copy|Original]
w8:Import Audio File...
yk:[1][Please select an Audio Track in an Arrange Window.][Cancel]
w9: Screen Sets
wa: &Hyper
wb:Arrange
wc:Mixer
wd:Score
we:(Hyper)
wf:(Matrix)
wg:Chase Text Meta Events
wh: Audio Sync
wi: MIDI Remote
yl:[1][Key doesn't respond!|LOGIC Audio requires both|the LOGIC and the AUDIO key.|Please reconnect and reboot.][ OK ]
ym:[1][Key doesn't respond. Please reconnect Key and start again.|If you are using the key between mouse and computer,|you even might have to switch off the computer beforehand.][ OK ]
yn:[1][Key doesn't respond.|Please reconnect Key|and reboot.][ OK ]
wj:Set Locator
wk:Goto Position...
wl:Position
wm:as SMPTE
wn:Left Locator
wo:Right Locator
wp:Tempo Interpreter
wq:Connection
wr: off USB Unitor Family Modem Printer
ws:MTC Pickup Delay [frames]
wt: Mixer Automation: Merge
wu: Mixer Automation: Replace
wv: Mixer Automation: Update
ww: Automation Soft Fade Time...
wx: Locate MIDI Metronome Click...
wy: Cut all names
wz: Copy all names
x0: Paste all names
x1: Init Names as Numbers
x2: Init General MIDI Names
x3: Update Using Autolink
x4:Behave as Menu
x5:Position
x6:Status
x7:Cha
x8:Pitch
x9:Vel
xa:Subposition
xb:mapped to
xc:Universal Map
xd: Thru Fix MapSet
xe:Events will be sent alternatingly to cable 1 or 2
xf:Sysex Length
xg:Checksum
xh:Filter non-matching
xi: Sysex:
xj: Checksum
xk: Value
xl: Position
xm:Toggle Velocity Engine support
xn:Initialize Song
xo:1/3 Page Left
xp:1/3 Page Right
xq:1/8 Page Left
xr:1/8 Page Right
xs:Use only Selected Events as Source
xt:Reclock only within Left and Right Source
xu:Use Guide Sequence
xv:Create Tempo Changes to preserve timing
xw:Left Source
xx:Right Source
xy:Source Tempo
xz:Left Destination
00:Right Destination
01:Destination Tempo
02:Step increment
03:SMPTE mode
04:SMPTE type
05:TV format
06:Refresh
07:LTC Freewheel
08:VITC Freewheel
09:VITC line 1
0a:VITC line 2
0b:Visible Timecode Display on Video:
0c:Horizontal Position
0d:Vertical Position
0e:Size
0f:Style
0g:(not recognized)
0h: Read Generate
0i:LTCVITCoff
0j:PALNTSC ?
0k: small big
0l: white 1 black 1 white 2 black 2
0m:whitegraydarkblack
0n: Track Name
0o:Create Audio Effect Track
0p:Create Audio Output Track
0q:Edit Patch Names...
0r:Bank Name
0s:Patch Name Editor
0t:Registering Online
0u: Video + 9 Frames Video + 6 Frames Video + 3 Frames normal Video - 3 Frames Video - 6 Frames Video - 9 Frames
0v:Video to Song adjust
0w:Listen to MMC Input
0x:Reclock
0y:Import DNA Template
0z: 0.5 Size
yo:[3][Please create a folder named 'GROOVES' on your hard drive, put groove files in it and restart ^P.][OK]
yp:[1][Do you want to create a special folder named 'Grooves!' as template destination?][Cancel|Create]
10: Original Size
11: 2x Size
12: 4x Size
13: 8x Size
14: Pixel 512 x 384
15: Pixel 640 x 480
16: Pixel 768 x 576
17: Make Proportional
18: Center
19: Best Size without Borders
1a: Contiguous Sync
1b: Parameters
1c: Video to Song Adjust...
1d: Follow Tempo
1e:Position
1f:Basis Tempo
1g:Movie Start
1h:Save MIDI File as:
yq:[1][SampleCellÖ successfully installed! Please make sure| a SampleCell object in the environment is created.][OK]
1i:Sort Tracks by
1j:MIDI Channel
1k:Audio Channel
1l:Output Channel
1m:Instrument Name
1n:Track Name
1o:Username
yr:[1][Current track or object is protected.|Do you want to perform the operation anyway?][Cancel|Continue]
ys:[1][Objects cannot be pasted on protected tracks.|Do you want to paste them to unprotected tracks instead?][Cancel|Paste]
yt:[1][Do you want to delete all|existing automation data of|the right side?][Delete|Cancel]
yu:[1][Instrument of object and track don't fit. Keep the Instrument and find a new Track? ][Keep Track|Keep Inst.]
1p:Length
1q:Crossfades
1r:Time [ms]
1s:Curve
1t:Use OMS in addition to the built-in MIDI driver
yv:[2][In the last session, ^0 crashed or hung because the driver of ^1 port "^2" does not work correctly. This driver has been disabled in WIN.INI. Try to retrieve an update of this driver, install it and reactivate the port by clicking "Reactivate".][Reactivate|OK]
yw:[2][While trying to open MIDI port "^0" in function"^1", the error "^2" occured.|Make sure that the MIDI interface is connected and switched on.| |╖ "No more warnings" skips all ports which cannot be opened without warning message.|╖ "Disable" disables the port permanently. You can re-enable it in file WIN.INI.|╖ "Skip" leaves the port unused in this session.|╖ "Retry" retries opening the port.][No more warnings||Disable|Skip|Retry]